§ 5.15. Performance standards during construction.

5.15.1. Applicability.

The provisions of this section apply to any special use permit, subdivision plat, site plan review approval, or zoning compliance permit.

5.15.2. Criteria.

All development subject to subsection 5.15.1, above, shall comply with the following standards during the construction process:

(a)

The applicant shall comply with the Noise Control Code for the Town of Chapel Hill (chapter 11, article III of the Town Code of Ordinances).

(b)

The applicant shall comply with the stormwater management standards, section 5.4 of this appendix.

(c)

The applicant shall comply with the town's erosion and sedimentation control standards, section 5.3.1 of this appendix and article 5 of chapter 5 of the Town Code of Ordinances.

(d)

All filling, grading, dredging and other development shall occur only on the property subject to the application unless otherwise required by the conditions of approval.

(e)

No construction or development shall occur that interferes with the use of a recorded easement.

(f)

Bicycle and pedestrian systems shall be maintained during construction activities.

5.15.3. Penalties for Violation.

If the town manager determines that the applicant is in violation of any of the standards set forth in subsection 5.15.2 above, the applicant shall be subject to section 4.13 of this appendix. The town manager may revoke the zoning compliance permit, site plan review, or special use permit until the site subject to the application, or any contiguous property affected by a violation of this section, is restored to its state prior to the violation. The applicant may appeal the decision of the town manager pursuant to section 4.10 of this appendix.